Bit One е мултифункционален дигитален процесор с възможност за свързване към всеки аналогов или цифров източник, превръщайки го от обикновена в система от много висок клас със страхотни възможности. Въпреки компактните си размери, Audison Bit One има последно поколение 266 MHz / 32 bit floating point DSP микропроцесор. Конфигурацията става с прост и интуитивен компютърен софтуер, който позволява настройка на всяко ниво от входния сигнал до изходния. В комплекта има включено дистанционно управление DRC (digital remote control), чрез което потребителят има контрол над всички най-необходими функции. Audison Bit One е награден с най-престижната европейска награда EISA за най-добър звуков процесор.

Виж демонстрация

   Power Supply: Audison Bit One

Voltage: 11 ÷ 15 VDC
Idling current: 0.45 A
Switched off without DRC: < 0.5 mA
Switched off with DRC: < 1.8 mA

Remote IN voltage: 7 ÷ 15 VDC (1.3 mA)
RemoteOUTvoltage : 12 VDC (130 mA)

Distortion - THD@1 kHz, 1 V RMS Output:
Bandwidth: 4.5 ÷ 21 kHz
S/N Ratio @ A weighted: 102 dBA
Channel Separation (@1 kHz): 77 dB
Input sensitivity (Low Level): 0.3 ÷ 5 V RMS
Input sensitivity (High Level): 1.2 ÷ 20 V RMS
Max Output Levels: 4 V RMS
Input impedance (Low Level): 20 kΩ
Input impedance (High Level): 5 kΩ

Inputs: Audison Bit One

LowLevel (Pre In):
Ch1÷Ch6,AUX1L/R,AUX2L/R
High Level (Speakers In): Ch1÷ Ch8, Phone In
Coaxial and Optical (S/PDIFMax48 kHz/24bit, PCM)
Outputs: Analog Pre Out: Ch1÷Ch8
Digital Out 48kHz-24 bit AD Link: Ch1÷ Ch8

Crossover: Audison Bit One

Type: 12/24/36/48dB Linkwitz
6/12/18/24/30/36/42/48dB Butterworth
Mode: Full / HiPass /LowPass/BandPass

Equalizer: Audison Bit One

Type: 31 Band, ISO 1/3 Oct, 20 Hz ÷ 20 kHz
Gain: ± 12 dB

Time Alignment: Audison Bit One

Delay: 0 ÷ 22 ms in 0,02 ms steps
(748 cm/294.5 inch)

Size: Audison Bit One

WxHxD (mm/inches): 225 x 32,3 x 150
8.85” x 1.27” x 5.90”
Weight (kg/lb): 1,345 / 2.965

Audio DSP and converters: 32-BIT floating point Analog Devices Sharc (Clock speed: 266MHz) Digital Signal
 Processing chip and Wolfson A/D D/A converters working in PCM at 48kHz with 24 Bit
resolution. Tuning functions can be heard in real time due to processing speed

Audio Inputs: 8 independent high-level channels (with automatic summing capability) or 6 independent
analog low-level channels
2 analog low-level stereo auxiliary inputs
1 optical digital input
1 electric coaxial digital input
1 high-level momentary audio interrupt input (with Mute IN) for use with mobile phone or
navigation systems

Audio Outputs: 8 independent low-level analog channels featuring adjustable level and 1 AD Link output
(8 independent digital audio channels through a single CAT 5.S LAN cable for use with
AD Link provided amplifiers)

Digital Control System: 1 USB /B (2.0) connector for PC connection
 2 AC Link control bus connectors for DRC and AC Link amplifiers

Configuration: Guided procedure that, thanks to a wide range of set names, provides the ability to assign each component to the Bit One connections and automatically coordinate their functioning

Turn-on Controls: ARTTM automatic remote turn on/off circuit. Through the car ignition key with memory function. Through the DRC. Automatically through the hands-free phone kit.

In/Out Volume: Input sensitivity automatically adjusted for the main inputs (with supplied Test CD
and DVD)
Manual input sensitivity adjustment for auxiliary inputs
Independent level control for each output channel for system fine tuning (-40 ÷ 0 dB)

Dynamic Equalizer: System automatically self-adjusts through an equalization between low and high listening levels that can be set by the user and controlled by the DRC

De-equalization and calibration: Automatic de-equalization of signal fed into the high-level inputs (with supplied Test CD or DVD) and levels calibration


Equalizers: One 31-band graphic equalizer (1/3Oct.; ±12dB) for each one of the 4 auxiliary input
One 31-band graphic equalizer (1/3 Oct.; ±12dB) for each one of the 8 output channels

Crossover Filter: Filter typology: Selectable; Hi-pass, Lo-pass, Bandpass, Full Range
Cut-off frequency: 70 steps available from 10Hz to 20kHz
Cut-off slope: Selectable; 6 to 48 dB/Oct.
Alignments: Selectable; Linkwitz or Butterworth
Mute: Selectable for each output (On/Off)
Phase: Selectable for each output (0°/180°)

Signal channels reconstruction: It can reconstruct a stereo signal from a multi-channel signal. In addition it can reconstruction a centre channel and subwoofer channels from a stereo input alone

Time Alignment: Guided procedure for the speaker distance data entry with an automated
calculation of proper delay times for each channel for accurate time alignment set-up.
System also provides for manual fine tuning of delay (0÷22 ms max)

Auto Restart: Automatic turn Off/On, if the DSP locks up

DRC: Master Volume control, Subwoofer Volume control, Balance control, Fader control, Input
selection, Memory selection, Dynamic Equalizer On/Off, Adjustable display brightness,
Access to digital features of Audison TH amps if connected

Memory: 4 presets separately managed and recalled by the DRC Remote Control

Bit One software: Microsoft Windows (Win 2000, XP, Vista) based software with “Standard” and “Expert” operating modes