Car Solutions 895879 Кабелен преход за вход за задна камера за Toyota Touch CY17/CY19/Entune 3

Кратко описание:

Cable for rear view camera connection to the OEM monitor Toyota Touch CY17 / CY19 / Entune 3. Using this cable you will be able to install the aftermarket camera Plug&Play without damaging the car wires.

Image from the rear view camera will automatically be displayed on the screen when reversing. The device is connected to the 24 pin socket (as shown in the connection diagram). After connection all OEM functions which work using this socket are preserved due to transit type of connection.

Note! The additionally installed rear view camera should be powered from ACC line (first turn of the key), otherwise the camera input will be not active. Depending on the type of the camera to be connected, namely on the voltage required for the camera, you can use input voltage +6 V, which the monitor produces. In case the camera requires more than +6 V, connect the camera power to ACC line.

Note! Only cameras in NTSC format are supported.

The most frequently asked questions about camera and video connection cables.

Compatibility

Touch 2 CY17 / CY19 (MM17 / MM19)

Entune 3.0

Link 2019

Note! Only cameras in NTSC format are supported.

The photo is provided for reference only. Appearance of the control panel and monitor may slightly differ depending on the car model.

Manuals

• Connection diagram for the cable for Toyota

Package Content:

• Car Camera Connection Cable - 1 pc.